|
|
The Short Stop, Model 352
AC Leakage Current Tester |
| The BEST tester available for electrical repair. If you must verify the safety and performance of electrical products you will not find a better value. Tests products for short circuits, continuity of the ground wire, hi-pot, leakage current and current draw. |
 |
| Standard Features |
| Full 20A current capacity - All 120V tools in common use can be tested. |
Full 20A current capacity - All 120V tools in common use can be tested.
Automatic short detector
Tests for both line-to-line and line-to case
shorts.
Tests extension cords
A built-in extension cord tester checks
continuity and ground wire resistance.
Tests quality of ground wire
The quality as well as the continuity of
the ground wire is measured. Poor
quality ground connections are rejected.
Verify tool performance
Multi-scale ammeter reads the current
drawn by tool or appliance. This helps
identify defective bearings or gear
trains, shorted coils, or poor brush
contact.
Direct reading leakage meter
Displays actual leakage current (potential
shock hazard) with good, marginal,
and danger levels clearly shown.
Dielectric test
Tests the dielectric strength of the tool
or appliance and components with
selected voltage. Excessive leakage or
dielectric flash over causes automatic
shut down.
Full test sequence
Five push buttons sequence the product
through the tests specified by
Underwriters Laboratories and the
Canadian Standards Association.
|
| All tests are designed to comply with UL, CSA, TUV, VDE, SAA, ANSI, BSI and others. |
| |
| Specifications |
Electrical : Designed to test 120V metal cased
and double insulated tools and
appliances drawing up to 20A.
Continuity Test: Rejects ground wire resistance
of 0.5 ohms or greater.
Line-to-line shorts: Rejects line impedance
of less than three ohms.
Line-to-case shorts: Rejects fault
currents in excess of seven milliamps.
Leakage current test: Conforms to
American National Standard C101.1,
1973 as recommended by Underwriters
Laboratories. Non linear circuit displays
actual leakage current over scale of 0.1
to 10 milliamps.
Dielectric test: Test voltage of 0-3000V AC,
adjustable. Automatic fault detector and
self-limiting power source protect the
operator. Factory set at 5 MA. Complies
with UL's 120K requirement.
Self test: Provides a built-in reference for
self-verification.
Receptacle: NEMA 5-20R, 120V, 15/20A,
non locking.
Meter Accuracy: 3%
|
| |
| Place Order Contact Us |
|
Associated Products
Automatic Test Stations |
Model 311 Short Stop
Model 350 Short Stop
|
| |
| Manuals |
Users Manuals
Replacement Parts
Training Video DVD
|
| Prices |
352 The Short Stop™
AC Leakage Current Tester with Hi-Pot $1,620.00
Options
40001 NIST Traceable Certification
40002 NIST Traceable Certification w/data
40302 Multi-Outlet Adaptor
$110
40311 Digital Leakage Meter
$260
40312 Digital Ammeter
$260
40313 Digital Hi-Pot Meter
$260
40316 25A, 0.1 ohm Continuity Test $510
40317 10A, 0.1 ohm Continuity Test
$460
40319 Digital Leakage Meter (for medical applications) $260
40321 120/240 volt input/output (Requires L14-20R 120/240V, 20A input) $235
40325 Static Leakage Test
$195
40326 230V, 50Hz Input/Output
$415
40321 120/240V, 20A Input/ Output (Requires a L14 - 20R, 120/240V, 20A input) $235
40326 230V, 50 Hz Input/Output $415 |
|
| Ordering Information |
FOB: San Jose, California
30 Day Free Trial
Prove to your self that the products we offer are everything we say they are. If you are not completely satisfied, just return the product for a full credit or refund within 30 days. |
| Restocking Charges: |
15% on items returned after 30 days. Options, special features, engineering charges and labor charges are non-refundable.
Sotcher Measurement Inc. reserves the right to change prices without notice. |
| One Year LImited Warranty: |
| All instruments manufactured by Sotcher Measurement Inc. are warranted against defects in material and workmanship for a period of one year. We will repair or replace products which prove to defective, provided they are returned to us. This warranty is in lieu of all other warranties expressed or implied and no responsibility is assumed for consequential damages. In no case shall liability exceed the purchase price. |
| Payment Options |
| Credit Card - We accept Visa & Master Card |
| |
Nationally Recognized
Sotcher Measurement Inc. test equipment is in common use throughout the United States by major manufactures of power tools and appliances. |
| |
| Place Order Contact Us |
|
|
|
| |
|
|
